Samsung TXT3093WHX Service Manual page 121

11-1-3 Connection Jacks (Rear)
Use the rear panel jacks to connect an A/V component that will be connected continuously, such as a VCR or a DVD player.
Because there are three sets of input jacks, you can connect three different A/V components (i.e., a VCR and a DVD, 2 VCRs, etc.
TX-T2791H/TX-T3091WH
① ANT IN
Connect to an antenna(air) or cable TV system.
② ② AV IN 1 / AV IN 2
Video and audio inputs for external devices, such as a
camcorder or VCR.
③ AV OUT
Connect to the audio/video input jacks of a recording VCR.
④ ④ COMPONENT IN 1, 2
Connect Component video/audio.
⑤ DIGITALAUDIO OUT (OPTICAL)
Connect to a Digital Audio component.
⑥ ⑥ HDMI IN 2
Connect to the HDMI jack of a device with HDMI output.
⑦ UPGRADE PORT (USB)
Connect for service and software upgrade.
Samsung Electronics
TX-T2793H/TX-T3092WH/TX-T3093WH
⑧ ⑧ HDMI/DVI IN (TX-T2791H/TX-T3091WH)
HDMI1/DVI IN (TX-T2793H/TX-T3092WH/TX-T3093WH)
Connect an S-Video signal from a camcorder or video game.
- Connect to the HDMI jack of a device with HDMI output.
These inputs can also be used as a DVI connection with
separate analog audio inputs.
An optional HDMI/DVI cable will be necessary to make this
connection. When using the optional HDMI/DVI adapter, the
DVI analog audio inputs on your TV allow you to receive left
and right audio from your DVI device.
(Not compatible with PC)
- When connecting this product via HDMI or DVI to a Set Top
Box, DVD Player or Games Console etc, make sure that it
has been set to a compatible video output mode as shown
in the table below. Failure to observe this may result in
picture distortion, image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to a PC
or Laptop Graphics Card. (This will result in a blank screen
being displayed)
DVI IN/AUDIO L/R
DVI audio outputs for external devices.
⑨ S-VIDEO IN
Connect an S-Video signal from a camcorder or video game.
Operation Instruction & Installation
11-3