Crt Board - Samsung TXT3093WHX Service Manual

9-3 CRT Board

9-3-1 Assy CRT Board
CNC02
FN1
■ CRT Drive
This supplies the final R/G/B signal from the System Board and the CRT deflection signal to the CRT.
Names & Roles of Key Parts
9-3-2
* GT504: Connected to CRT 1P GND.
* GT501, GT502, GT505, GT506: TBC-Wire connector. It plays the role of the CRT ground.
* CNC01: The R/G/B signals from the System Board are connected to this connector.
* CNC02: Power from the Deflection Board to drive the CRT and AMP is supplied to this connector.
* FV1: The connector used to connect the VM signal to the DY ass'y.
* FN1: The connector used to connect the signal to the Tilt Coil. It is necessary for the screen tilt adjustment.
Samsung Electronics
GT504
GT502
GT501
GT505
GT506
CNC01
FV1
PCB Diagram
9-3