Page 1
COLOR TELEVISION Chassis : K71A(N)_Prime Model : TXT3093WHX/XAA SERVICE Manual COLOR TELEVISION FEATURES ■ Slimfit (Low Depth) CRT DHC IC Adopted ■ ■ ■ Built-In HD Tuner S/W Upgrade Via the USB Port ■ ■ ■3D-Comb Filter (X242HIC Adopted) TXT3093WH...
When Check the AC power cord for possible damages. Keep voltage exceeds the specified limits, check each special the part or the lead away from any heat-emitting part. materials. Samsung Electronics...
Page 6
Critical safety parts should be bracketed with ( Use only regular parts for replacements (in particular, flame resistance and dielectric strength specifications). Irregular parts or materials may cause electric shock or fire. Samsung Electronics...
5. Check for insulation between the blade of the AC plug 10. The sharp edges of the metal material may cause and that of any conductive materials (i.e. the metal physical damage, so ensure wearing protective gloves panel, input terminal, earphone jack, etc). during the repair. Samsung Electronics...
These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so. Samsung Electronics...
5. Make sure to turn the power off and unplug the power cord from the outlet before repositioning the product. Also check the antenna cable or the external connectors if they are fully unplugged. Damage to the cord may cause fire or electric shock. Samsung Electronics...
Black Bezel 2Tone New Design Color Design - Development Grade: Grade 3 - Prototype Model: TXT3093WHX/XAA Other - Progressive, Digital All Format Input Support : 1080i, 720P, 480P, 480i - Software Upgrade using the USB Port on the Back Panel ■...
Digital Signal IN (Y/Pb/Pr) Rear:2 Rear:2 Ports × × HDMI ○ Digital Audio OUT ○ Video OUT/Audio OUT Rear:1 Rear:1 Remote Controller TM87 TM87C ■ Option Info Model TX-S3079WH TX-T3093WH Design Visual Quality Digital Comb Filter 3D-COMB 3D-COMB Port HDMI ○ Samsung Electronics...
4. When Replacing the CRT Ass'y: No adjustments required. 5. When Replacing the Front TACT SWITCH Power Switch: No adjustments required. 6. When Replacing the Side AV: No adjustments required. 7. When Replacing the Control Switch: No adjustments required. Samsung Electronics...
OPTION CHECK SUM USER RESET T_PRIMKR0_XXXX, XXX.XX.XXXX T_PRIMKR0_XXX 3. Functions of the Keys within Service Mode MENU Show all menus Move the cursor to select an item. ▲ / ▼ Adjust the selected configuration value ◀ / ▶ Samsung Electronics...
Adjust Low_ Cor Adjust H Tra Adjust Adjust Angle Adjust V Position CXA Left Blk CXA Right Blk CXA Upper Blk CXA Lower Blk H Comp V Comp Pin Comp AFC Comp Horizon Line Cor Output Img Pos Samsung Electronics...
Page 21
Input Img WidthL Input Img WidthH Input Img HeightL Input Img HeightH input H Blk PeriodL input H Blk PeriodH input V Blk Period Test Patt En Test Patt Form Output Form Output Img WidthL Output Img WidthH Samsung Electronics...
Page 22
Horizon Inn B Cor Horizon Line S Cor Horizon Line M Cor 4. Line Setup Data 29Z50 ITEM Adjust / Fix Remark 32Z40 32Z30 29Z40 29Z30 V Line Index V Line Poistion H Line Index H Line Poistion Samsung Electronics...
Page 23
GREEN Cutoff BLUE Cutoff Adjust Sub Bright Adjust Color On/Off CR Offset CB Offset RED Drive Adjust GREEN Drive BLUE Drive Adjust Sub Contrast Adjust Sub Color Sub Tint COL Axis CTI Level LTI Level LTI Mode System Samsung Electronics...
Page 24
29Z40 29Z30 ABL Mode Gamma DPIC Level DC Trans ABL TH VM Level VM Coring VM f0 VM Limit VM Delay SHP CD Gain SHP f0 SHP f1 Gain Pre/Over AKB Timing S ABL P ABL Picture Limit Samsung Electronics...
Page 27
Movie Warm 1 BC OS Movie Warm 1 RD OS Movie Warm 1 BD OS Movie Warm 2 RC OS Movie Warm 2 BC OS Movie Warm 2 RD OS Movie Warm 2 BD OS 4:3 size H_shift offset Samsung Electronics 3-11...
Page 28
High : x : 269± 3 y : 274± 3 Y : 45± 3 White Balance (Standardization Applied) Balance Low : x : 269± 3 y : 274± 3 Y :1.2± 0.3 The Highest Voltage among RK, GK and BK Screen Voltage screen voltage 180Vp-p - 3V 3-12 Samsung Electronics...
Page 29
Input horizontal blanking period Input V Blk PeriodL Vertical blanking period Test Patt En Test pattern enable Test Patt Form Test pattern format output Img WidthL width of output image output Img WidthH width of output image Samsung Electronics 3-13...
Page 30
Horizon Inn T Cor Inner corner correction at the top of imag Horizon Inn B Cor Inner corner correction at the bottom of imag Horizon line Cor Horizontal linearity correction output Img H Pos Horizontal posituin correction 3-14 Samsung Electronics...
Page 31
Index of the indicatora in vertical direction Indicator Y Index of the indicatora in horizontal direction Point Data Position adjustmemt of each point Curve Index Address index of each line segment point Line Data Position adjustmemt of vertical line Samsung Electronics 3-15...
2. Press "Power Off → Mute → 1 → 8 → 2 → Power On" using the remote control and enter Factory Mode. 3. Enter Deflection Mode. 4. Adjust the V-AMP, V-SHIFT, H-AMP and H-SHIFT items so that the width becomes 5 and the height becomes 4. 3-16 Samsung Electronics...
Page 33
7. When the adjustments are complete, display the Lion pattern and check that the picture size has not been changed. If there is no change, finish the adjustments. Samsung Electronics 3-17...
2. Select Settings → Function Help. 3. Move the cursor to ON from "ON/OFF" and press the Display key on the remote control. 4. The version of the software will be displayed at the bottom of the menu. ex)T-PRIMAUS0-0010, DATE:2006-11-06 3-18 Samsung Electronics...
Page 35
2. Turn off the TV by remocon power key [LED color red] 3. Inset the USB memory stick to rear USB port. 4. Turn on the TV by remocon power key. 5. After entering with the set menu, it selects the software Upgrade. 6. Choose USB contents. Samsung Electronics 3-19...
Page 36
3-5-3 Service Download Procedure-2 1. Repeat the upper 1~4 step. 2. Push the remocon button "Mute→ 7→ 8→ 9→ Exit" seguently. 3. After 1'~1'30" CPU will be rebooting.→ If you can see the normal picture IC finished. 3-20 Samsung Electronics...
Dynamic Focus VR 6. Slowly turn the Dynamic Focus VR clockwise so that the 2nd line is the most clearly displayed. After Adjustment 7. Check the entire screen focus and repeat steps 3 to 6, if necessary. Samsung Electronics 3-21...
Page 38
5. Adjust the Screen VR of FBT so that the highest point of the Pedestal Level is 180V 180V Screen Adjust Method the Screen Voltage for Toshiba Pattern by Oscilloscope ※ Screen Voltage Measurement Data Item Data Required Adjustment The Highest Voltage among RK, GK and Screen Voltage Screen Voltage BK 180Vp-p-3V 3-22 Samsung Electronics...
Page 39
4. When the adjustment is finished, check the following checklist. - If there is a spot on the screen when turning the TV set off/on, adjust the Screen Voltage again. - If there is a ghost line on the screen, adjust the Screen Voltage again. Samsung Electronics 3-23...
6) Check if the channels are configured. 7) Check if the splitter is working properly. 8) Check if the Cable TV company broadcasts DTV. ■ If an abnormal picture is displayed on the screen, display the TEST pattern and check the adjustments. Samsung Electronics...
Page 71
Is the Regulator Board Can you watch digital connections normal? installed properly? broadcasts properly? Repair or replace the Is the antenna connected Repair or replace the Main Board. CRT Board. to the tuner properly? Repair or replace the System Board. Samsung Electronics...
You can check the checksum according in the following order. Factory Mode → Checksum → Right Button → Calculate Checksum → Output Checksum (e.g. 0xab2b) ■ Checksum Examples T-PRIMAUS0-0020 : checksum=0x9f7e T-PRIMAKR0-1000 : checksum=0x054b Samsung Electronics...
FD804S check D805 check IC801S (STR6750) change IC802 #3 check Regulator B'd Power port-Stdby 5V short C839 142V check HS401 Change Test Point Stand-by Power On FJ6920 C839 70~80V 145V Regulator B'D 9V C810 6.5~7V check Regulator B'D change Samsung Electronics...
Page 74
Check the DTV Block Check if the Tuner is 5V. Replace the Regulator Board. Check the Tuner SDA, and SCL Check the CVBS output. Replace the Tuner. Check the signal picture. Check the RF Block of the System Board. Samsung Electronics...
Page 75
Input Pin B16 (DR2009) Replace the System Board. No Signal Check DIC4000 (PW9050L) DL4005~DL4007 Replace the System Board. No Signal Check the DIC01 outputs of #62, #63 and #64 (CXA2165) Replace CXA2165. Check the signal picture. REPAIR END Samsung Electronics...
Page 77
Half NIM CHANGE no signal DIC2000(X242H) output MPEG #A15, #A16(DR2167 CHECK SYSTEM B'd CHANGE no signal DIC4000(PW9050L)) output DL4005~DL4007 check SYSTEM B'd CHANGE no signal DIC01 output #62,#63 #64 check (CXA2165) CXA2165 CHANGE signal picture CHECK REPAIR END Samsung Electronics...
Page 78
TU01S #20 SIF_0 I2S out input signal CHECK(TUNER) CHECK(Half NIM tuner) CHECK check (MSP4450K) Check the Power Block. DIC2000 DIC5011(MSP4450K) Check the (X242H) I2S output connectivity B+CHECK(8V,5V) DRW2002 DIC11 output #26,27(SPK_OUT) (MSP4450K) CHANGE CHECK SPK cable connection REPAIR END Samsung Electronics...
Page 79
R425→ 0.47ohm Check the VD_P/VD_N port of the System Board Check IC301 (STV9381) Check SCL-M5/SDA-M5 of the System Board Check DIC01 (CXA2165) of the System Board. Replace the Replace DIC01 (CXA2165) System Board. of the System Board 6-10 Samsung Electronics...
The RF / DTV signal is transmitted to the Tuner of the System Board through the Splitter. If the signal is not received, check the following items. - Supplied Power: 5V, 33V, 9V - RF Trouble Check: Check the CVBS output - AUDIO Trouble Check: Check the SiF Signal output Samsung Electronics 6-11...
Page 81
If no signal input and output is detected, check the following items. - Supplied Power: 9V - Input Trouble Check: Check the connecting jacks. - Output Trouble Check: Check TIC01 (RF/AV/S-VHS) TEA642 425D 5D 6-12 Samsung Electronics...
Page 82
If the signal input and output are not detected, check the following. - Supplied Power: 2.5V, 3.3V - Input Trouble Check: Check the jack and input pin. - Output Trouble Check: Check DIC7010 and the output pin. (Check the square wave signal through digital output.) Samsung Electronics 6-13...
Page 83
The IC removes noise from the signal processed by the EAGLE IC for visual quality enhancement. Trouble with this IC is rare. - Supplied Power: 1.8V, 3.3V - Input Trouble Check: R/G/B 24 Bit H/V/Clock - Output Trouble Check: Y/Pb/Pr H/V 6-14 Samsung Electronics...
Page 84
If V-Drive output is not detected, check if the IC is out of order. - Supplied Power: 5V, 15V - Input Trouble Check: Y/Pb/Pr H/V - Output Trouble Check: R/G/B, ABL, EW, V/H-DRIVE TP18 TP19 TP20 TP17 TP15 TP16 Samsung Electronics 6-15...
Page 85
6. MSP4450K (Audio Processor) Diagnosis MSP4450K receives and processes SIF signal output from the Tuner, external input 1/2, and COMP 1/2 signal. - Supplied Power: 5V, 8V - Input Trouble Check: SiF, Scart 1/2/3/4 - Output Trouble Check: Lt/Rt, Monitor Out 6-16 Samsung Electronics...
Page 86
7. TDA7297 (Audio Processor) Diagnosis TDA7297 receives the audio signal from the Audio Processor (STV8258) and outputs audio at 10W + 10W. - Supplied Power: 16V - Input Trouble Check: Lt/Rt - Output Trouble Check: L+, L-, R+, R Samsung Electronics 6-17...
Page 87
- Is the vertical input waveform output from the CXA2165 Chroma IC? ..Input Wave Form: Weak ▶ If the signal is not measured, check the CXA2165 VCC power voltage ====> 9V 3. Check if 15V is measured at the SMPS Transformer. 6-18 Samsung Electronics...
Page 95
8-2-2 Main Connector Pin CN701 CN403 Main↔Side A/V Main↔CRT PIN No. Pin NAME PIN No. Pin NAME VCC-200V HEATER VCC_-16.5V VCC_20V AV2-L AV2-R CN902 CN901 Main↔Control Main↔LED,RMC PIN No. Pin NAME PIN No. Pin NAME STD-LED KEY1 POWER(KEY2) KEY3(TV/VIDEO) Samsung Electronics...
Page 96
Pin NAME PIN No. Pin NAME 215V HEATER -16V 142V POWER TILT Connect the VM signal to the DY Ass'y. Connect the signal to the Tilt Coil. PIN No. Pin NAME PIN No. Pin NAME VM-OUTPUT VM-OUTPUT TILT TILT Samsung Electronics...
9-1-2 Names & Roles of Key Parts * DCN8000, DCN8001: 52 Pin→ Supplies power, outputs the deflection signal, receives external inputs and outputs sound. * DJ10: The connector connected to the CRT Ass'y. The RGB DRIVW, TILT, and VM signals are connected here. Samsung Electronics...
* CN902: Handles the Channel Up/Down, Vol Up/Down, and Video keys in the Key Control Block. * CN403: Outputs the CRT drive voltage of 200V, 145V, ± 18V, and connects the Heater. * CN701: External IN2 VIDEO-2/S-VHS/L/R * CN601: Additional Sound Output Samsung Electronics...
* CNC02: Power from the Deflection Board to drive the CRT and AMP is supplied to this connector. * FV1: The connector used to connect the VM signal to the DY ass'y. * FN1: The connector used to connect the signal to the Tilt Coil. It is necessary for the screen tilt adjustment. Samsung Electronics...
Schematic Diagram 10-3 Main 10-3-1 Main-1 This Document can not be used without Samsung’s authorization. TP01 TP07 Power Signal TP08 TP02 TP03 TP01 TP02 TP04 TP05 TP06 TP08 TP05 TP07 TP04 TP06 TP03 Samsung Electronics 10-3...
Page 105
Schematic Diagram 10-3-2 Main-2 This Document can not be used without Samsung’s authorization. Power Signal 10-4 Samsung Electronics...
Page 106
Schematic Diagram 10-3-3 Main-3 This Document can not be used without Samsung’s authorization. TP09 Power Signal TP10 TP10 TP11 TP09 TP11 Samsung Electronics 10-5...
Schematic Diagram 10-4 D-Module 10-4-1 D-Module-1 This Document can not be used without Samsung’s authorization. Power Signal 10-6 Samsung Electronics...
Page 108
Schematic Diagram 10-4-2 D-Module-2 This Document can not be used without Samsung’s authorization. Power Signal TP12 TP12 Samsung Electronics 10-7...
Page 109
Schematic Diagram 10-4-3 D-Module-3 This Document can not be used without Samsung’s authorization. Power Signal 10-8 Samsung Electronics...
Page 110
Schematic Diagram 10-4-4 D-Module-4 This Document can not be used without Samsung’s authorization. Power Signal Samsung Electronics 10-9...
Page 111
Schematic Diagram 10-4-5 D-Module-5 This Document can not be used without Samsung’s authorization. Power Signal 10-10 Samsung Electronics...
Page 112
Schematic Diagram 10-4-6 D-Module-6 This Document can not be used without Samsung’s authorization. Power Signal Samsung Electronics 10-11...
Page 113
Schematic Diagram 10-4-7 D-Module-7 This Document can not be used without Samsung’s authorization. Power Signal 10-12 Samsung Electronics...
Page 114
Schematic Diagram 10-4-8 D-Module-8 This Document can not be used without Samsung’s authorization. Power Signal TP13 TP14 Samsung Electronics 10-13...
Page 115
Schematic Diagram 10-4-9 D-Module-9 This Document can not be used without Samsung’s authorization.. Power Signal 10-14 Samsung Electronics...
Page 116
Schematic Diagram 10-4-10 D-Module-10 This Document can not be used without Samsung’s authorization. Power Signal Samsung Electronics 10-15...
Page 117
Schematic Diagram 10-4-11 D-Module-11 This Document can not be used without Samsung’s authorization. Power TP15 Signal TP16 TP17 TP18 TP18 TP19 TP20 TP19 TP17 TP20 TP15 TP16 10-16 Samsung Electronics...
Page 118
Schematic Diagram 10-4-12 D-Module-12 This Document can not be used without Samsung’s authorization. Power Signal Samsung Electronics 10-17...
In the on-screen menu, use the CH buttons as you would use the ▲and▼ buttons on the remote control. ⑤ ⑤ Power Indicator Lights up when you turn the power off. - Power Off: Red - Power On: Off Samsung Electronics 11-1...
Connect a S-video signal from a camcorder or video game. ② ② VIDEO INPUT Used to connect a video signal from a camcorder or video game. ③ AUDIO INPUT Connect the audio signals from a camcorder or video game. 11-2 Samsung Electronics...
Page 121
- Do not attempt to connect the HDMI/DVI connector to a PC or Laptop Graphics Card. (This will result in a blank screen being displayed) DVI IN/AUDIO L/R DVI audio outputs for external devices. ⑨ S-VIDEO IN Connect an S-Video signal from a camcorder or video game. Samsung Electronics 11-3...
You can use the remote control up to about 23 feet from the TV. When using the remote, always point it directly at the TV. You can also use your remote control to operate your VCR, DVD, Cable box, and Samsung Set-top Boxes.
① Remove the 2 screws fixing the Terminal Board and the Board Jacks. : RH, +, B, M4, L15, ZPC(BLK), SWRCH18A ② Lift the fixing holder up at and pull the Terminal Board to separate it from the unit. Samsung Electronics 12-1...
Page 124
② To separate the power cord, slide the fixing clip and lift the cable up. ① Separate the CRT Ass'y from the CRT ② Separate the TBC wire, GND, VM and Tilt cables from the CRT Ass'y sequentially. 12-2 Samsung Electronics...
Page 125
In addition, separate the wires on a flat and clean surface so as to prevent scratching of Pull the wires while the material and the PCB. pressing on the fixing clip. Samsung Electronics 12-3...
X242H is an optimized DTV MPEG IC developed by removing unnecessary functions of the X240H. In addition, the Sound Processor IC, STV8257 has been changed to MSP4450K. The other devices are the same and additional functions including the Service Software Upgrade function are the same. Samsung Electronics 13-1...
The analog signal from among the video signals is switched by TEA6425, and the digital signal is switched by Mst3387. ⊙ Audio Processing Block In this block, the audio signal input through the Tuner, Video, etc. is processed by the MSP4450K Audio Processor and the signal is output through the speaker via the TDA7297 Audio Amplifier. 13-2 Samsung Electronics...
Page 129
⊙ Deflection: Receives a horizontal DRIVE waveform from the System CXA2165 and drives the vertical. Major IC: HD1530 ⊙ EW: Receives the EW waveform from the System CXA2165 and corrects EW. ⊙ Regulator: Receives 15V from the Power Block and outputs the 5V and 1.0V required for the System Board. Samsung Electronics 13-3...
The mirror returns to a blank state so that no stains or after-images are left. The SAMSUNG SKY500N model has both an ANYNET port and a SERVICE jack port. Because the shape of the ANYNET port on the DLP TV is the same as that of the SERVICE Confusion between the jack port of the SKY500N, it fails to turn the TV off after a connection has been reported.
VHF refers to TV channels 2 to 13, and UHF refers to TV chan- tinguished by the white (left) and red colors (right). nels 14 to 69. External Input External Input is connecting video devices such as a VCR, camcorder, DTV receiver, DVD, etc. as a video source. 14-2 Samsung Electronics...