Usb Operation - Jensen VX7010 Operating Instructions Manual

VX7010

USB OPERATION

The unit will read the audio/video files on USB devices automatically.
Note: The USB/SD ports will recognize most USB/SD flash memory devices and
portable hard drives. Portable hard drives (hard drives must be formatted to
FAT32 and NTFS is not supported).
Inserting/Removing a USB Device or microSD Card
Note: The microSD card is used to update navigation software only.
To insert a USB device or microSD card:
1. Locate the Interface Cover on the front of the radio.
OPEN
USB Slot and microSD Card Slot Location
2. Lift the protective cover to reveal the USB slot and microSD card slots.
3. Insert the USB device/microSD card into the USB/microSD card connectors.
Note: microSD cards are inserted into the microSD card slot until a click is
heard. The click will ensure that the card is securely inserted to the unit.
To remove the USB device or microSD card:
1. Touch the SRC icon on the main menu or press the SRC button on the front
panel to switch to another mode.
2. Remove the USB device or microSD card from the connector.
Right Audio
1
Left Audio
2
Ground
3
V ideo
4
3.5mm A/V Cable (not included)
USB Cable (not included)
49