Table of Contents
Advertisement
JDC218BT
OPERATION
Connecting a USB Device
(sold separately)
Playing Music
Track Select
Fast Forward and
File Search
14
USB Operation
To play MP3 files from most USB mass storage devices, line
up the USB connector and insert the USB device into the
unit's USB port.
When a USB device is first connected, "USB READ" will
appear in the display and playback will begin momentarily.
Depending on the number of files and folders, it may take
several seconds for the device to begin playing. If no valid
MP3 files are detected, "NO FILE" will be displayed and the
last mode will be resumed.
Press TRACK
track. Press TRACK
current track. Pressing TRACK
beginning of the previous track.
Press and hold TRACK
Reverse
control to fast forward or reverse a track.
Pause
Press
Press
Press SELECT to enter the file/folder search mode. A list of
Step 1
all the folders from the USB device will be displayed.
Note: Any files located in the root directory will be located in
the folder named "ROOT". Press SELECT to view the files on
the root folder.
Step 2
Turn the volume knob to cycle through all the folders on the
device and press SELECT to choose the desired folder. The
list of files in the selected folder will be displayed. Turn the
volume knob to cycle through the list of files.
Note: Pressing GO BACK when viewing the contents of a
folder will return to the list of folders on the USB device.
Press GO BACK again to exit the search menu.
Step 3
Once the desired song is displayed, press SELECT to begin
playback of the desired song.
Note: Due to differences in USB device transfer speeds, it is
recommended to limit each folder to less than 30 songs.
ll
to skip to the beginning of the next
nn
ll
l
/ II to temporarily stop USB playback.
l
/ II again to resume playback.
to return to the beginning of the
nn
again skips to the
nn
or TRACK
on the remote
Advertisement
Table of Contents
