Jensen VX7010 Operating Instructions Manual page 246

VX7010 / VX7020 Software Update
Version: 7010.1001
Bluetooth Call While Navigating
When navigating and a Bluetooth call comes in, the user interface (UI) will
automatically switch to the Bluetooth UI. To return to the navigation UI while the
call is still in progress, press and hold the DISP button. The navigation UI will
display and navigation voice prompts will be overridden by the phone call. When
the call has ended, navigation voice prompts will return automatically.
Programmable Turn-On Volume
To set this function, rotate the rotary encoder (Volume control knob) to the
desired Turn-On Volume. While the green volume bar is displayed, press and
hold the rotary encoder for 2 seconds.
This update addresses the following items:
1. Adds Programmable Turn-On Volume.
2. Corrected Bluetooth / Back-Up camera issue. Condition: When vehicle is
placed in reverse and backing up on a BT call. Symptom: When the vehicle is
placed in drive, the BT call will transfer to the mobile phone. Call now stays in
Hands Free Mode.
3. Added Back-Up Camera image compensation – Normal / Mirror Image.
4. Keyless Disc Eject. To access function, when vehicle is OFF (Key out of the
ignition), press the Eject button two times.
5. Volume can be adjusted when back-up camera is active.
6. Added TFT opening options (VX7010 Only):
a. Auto Open – TFT will open/close automatically.
b. Auto Off – TFT will close automatically if open.
c. TFT Manual – TFT must be manually opened and closed.