6.16.3.
Replacing the high beam bulb
Remove the headlight from its support as described
in paragraph 6.16.2.
Extract the high beam bulb by rotating it counter-
clockwise.
Detach the connector from the burnt-out bulb.
CAUTION: Do not touch the bulb glass with
bare hands. If you do, clean the bulb with an
oil-free solvent.
Insert the connector in the new bulb.
Insert and lock the bulb holder in place by rotating
clockwise.
6
Replace the headlight on its support, following the
instructions described in paragraph 6.16.2.
MAINTENANCE
- 148 -
6