Panasonic U-72MF2U9 Installation Instructions Manual page 52

Hide thumbs Also See for U-72MF2U9:
Table of Contents

Advertisement

Checking the indoor unit addresses
Use the remote controller to check the indoor unit address.
CZ-RTC3 / CZ-RTC5 (High-spec wired remote controller)
1 Keep pressing the
simultaneously for 4 or more seconds.
The "Maintenance func" screen appears on the LCD
display.
Maintenance func
1. Outdoor unit error data
2. Service contact
3. RC setting mode
4.Test run
Sel.
Page [
2 Press the
or
If you wish to see the next screen instantly, press the
or
button.
Select "7. Simple settings" on the LCD display and
press the
button.
Maintenance func
5. Sensor info.
6. Servicing check
7. Simple settings
8. Detailed settings
Sel.
Page [
CZ-RTC4 (Timer remote controller)
<If 1 indoor unit is connected to 1 remote controller>
button and
1. Press and hold the
seconds or longer (simple settings mode).
2. The address is displayed for the indoor unit that is connected to
the remote controller.
Only the address of the indoor unit that is connected to the
remote controller can be checked.
3. Press the
button again to return to normal remote
controller mode.
<If multiple indoor units are connected to 1 remote controller (group control)>
1. Press and hold the
button and
seconds or longer (simple settings mode).
2. "ALL" is displayed on the remote controller.
3. Next, press the
button.
4. The address is displayed for 1 of the indoor units which is
connected to the remote controller. Check that the fan of that
indoor unit starts and that air is discharged.
5. Press the
button again and check the address of
each indoor unit in sequence.
6. Press the
again to return to normal remote controller
mode.
,
and
buttons
20:30 (THU)
] Confirm
button to see each menu.
20:30 (THU)
] Confirm
button for 4
button for 4
3 The "Simple settings" screen appears on the LCD
display.
Select the "Unit no." by pressing the
button for changes.
Simple settings
Unit no.
Code no.
3-1
Sel.
Next
The indoor unit fan operates only at the selected
indoor unit.
[
]
START
52
or
20:30 (THU)
Set data
01
0001
20:30 (THU)
CZ-RTC3 / CZ-RTC5
Number changes to
indicate which indoor unit
is currently selected.
Indoor unit address
Number changes
to indicate which
indoor unit is currently
selected.
Indoor unit address

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents