Sony F23 Operation Manual page 67

MAINTENANCE menu
Page title & No.
purpose
<AUTO IRIS> M06 AUTO IRIS
Auto iris adjustment
<OUTPUT M07 CURRENT
FORMAT>
Setting the output
video format
<DOWN M08 ASPECT
CONVERTER>
Setting the aspect
ratio for VBS output
<POWER SAVE> M09 MONITOR OUT
Selecting the output
power save mode
Item Default
OFF
WINDOW 1
OVERRIDE 0
IRIS LEVEL 0
APL RATIO 65
IRIS GAIN 0
IRIS CLOSE OFF
23.98PsF 4:4:4
SCAN PROGRESSIVE PROGRESSIVE,
FRAME 23.98
SIGNAL 4:4:4 RGB
SELECT FPS OFF
SET FORMAT
SQ
ACTIVE
DOWN CONVERTER ACTIVE
Settings Remarks
ON, OFF
1, 2, 3, 4, 5, 6 Select the auto iris
windows:
The shaded parts indicate
the area where light
detection occurs.
–99 to +99 To set the override to
temporarily change the
reference value for
brightness of the automatic
iris level, in the range of ±2
steps:
–99: Two steps to fully
+99: Two steps to fully open
The setting returns to "0"
when the power is turned
off.
–99 to +99 ±4 steps
–99 to +99 To adjust the response of
the iris for high-luminance
subjects
–99 to +99 To adjust the iris operation
sensitivity
ON, OFF
The current format is
displayed.
When INTERLACE is
INTERLACE selected for SCAN, select
half the value of the field
23.98, 24, 25, 29.97, 30,
frequency in FRAME.
50, 59.94, 60
4:4:4 RGB, 4:2:2 YCbCr
ON, OFF
Execute by ENTER.
SQ, EC SQ: Squeeze
EC: Edge Crop
PWR SAVE, ACTIVE
PWR SAVE, ACTIVE
1 2 3
4 5 6
closed iris
iris
67
Menu List