Advanced Play; Displaying Current Playback Condition / Program And Random Play - Panasonic SC-PT450 Operating Instructions Manual

Advanced play

Displaying current playback condition
Functions Menu
7 Basics
Example:
Current playback number
Playback
condition
Play mode
7 Details
Example:
Audio information
Subtitle information
Angle information
Aspect of current title
Total play time of
current title
Program and Random play
(during stop)
To exit program or random play mode while
stopped.
(several times)
• Selecting "Play as Data Disc" in Other Menu
(\ page 24) will be effective if the following
functions are not available to play WMA, MP3 or
JPEG contents.
• Some items cannot be played even if you
have programmed them.
Program play (up to 32 items)
1
Press the numeric buttons to select the item.
(
the selection.)
Example:
• Repeat this step to program other items.
• To select a 2-digit number
Example: To select 12,
18
RQT8043
 Basics  Details
(\ page 21)
Off (No on-screen display)
Elapsed play time
Current position
Program  Random
Off (Normal play)
Press [ENTER] to register
2
To select an item using the cursor buttons
Press [ENTER] and [5, ∞] to select an item, then
press [ENTER] again to confi rm.
To select all the items
While the "Chapter", "Track" or
"Content" fi eld is highlighted,
press [5, ∞] to select "ALL".
Then press [ENTER] again to
confi rm.
To change the selected program
1. Press [5, ∞] to select the program number.
2. Press the numeric buttons to change each item.
( Press [ENTER] to confi rm the
selection.)
To clear the selected program
1. Press [5, ∞] to select the program number.
2. Press [CANCEL] (or press [5, ∞, 2, 3] to
select "Clear" and press [ENTER]).
To clear the whole program
Select "Clear all" with [5, ∞, 2, 3] and press
[ENTER].
The whole program is also cleared when the unit
is turned off, the disc tray is opened or another
source is selected.
Random play
1
Press the numeric buttons to select a group
or title. (
register the selection.)
Example:
Discs which have multiple groups.
• To deselect a group, press numeric buttons
corresponding to the group you want to clear.
2
Example:
Press [ENTER] to