Min/Max Memory; Setting The Temperature Alerts; Setting The Indoor Temperature Alert; Setting The Outdoor Temperature Alert - Springfield 91049-1 Instruction Manual

•
When the alarm sounds again, press SNZ to continue the snooze function or press any button on the front of the
base station to discontinue snooze.
•
The alarm icon will remain on the display and the alarm will sound every day at the pre-set time until the alarm
is de-activated.

Min/Max Memory

•
Press the MAX/MIN button once to display the highest indoor and outdoor temperatures recorded since last
reset. MAX is shown on the display.
•
Press MAX/MIN a second time to display the lowest indoor and outdoor temperatures recorded since last reset.
MIN is shown on the display.
•
To clear and reset the max/min records, when either the MAX or MIN record is shown on the LCD display,
press and hold MAX/MIN for 2-3 seconds until the beep sounds.

Setting the Temperature Alerts

You can program your weather center to sound an alert whenever the indoor or outdoor temperature exceeds the
upper or lower pre-set level. The outdoor alert can be set for any remote channel.

Setting the Indoor Temperature Alert

•
Press and hold the ALERT button for 3-4 seconds. The high temperature limit icon and indoor temperature
will be flashing.
•
Press UP or DOWN to select the high temperature alert level.
•
Press ALERT and the low temperature limit icon and temperature will be flashing.
•
Press UP or DOWN to select the low temperature alert level.
•
Press ALERT to return to normal mode. The alert function will be activated and both the high and low limit
icons will show.
•
Press ALERT to activate or de-activate the alert function.

Setting the Outdoor Temperature Alert

•
Press and hold the ALERT button for 3-4 seconds.
•
Press CHANNEL to select the channel on which you want to set the alert. (1 to 3)
•
The high temperature limit icon and outdoor temperature for the channel you selected will be flashing.
•
Press UP or DOWN to select the high temperature alert level.
•
Press ALERT and the low temperature limit icon and temperature will be flashing.
•
Press UP or DOWN to select the low temperature alert level.
•
Press ALERT to return to normal mode. The alert function will be activated and both the high and low limit
icons will show.
•
Press ALERT to activate or de-activate the alert function.

RESET

Your multi-zone thermometer can be re-set in case of malfunction. Locate the RESET button at the back of the
base station. Push the button and you will hear a beep. The unit will re-set itself to the original factory settings.
Re-enter your settings according to the OPERATING INSTRUCTIONS.

PURCHASING ADDITIONAL REMOTE SENSORS

The remote sensor for this unit is SPRINGFIELD P/N 91661.
Additional sensors may be ordered directly from Springfield Precision Instruments by calling 1-888-809-3284.
Please have a major credit card ready when placing the call.