Table of Contents
Advertisement
User Manual
10.2 'Bluetooth' Wireless Comms (Wahl DHS520B variants only)
To capture information by Bluetooth communication from the Wahl DHS520B
to a laptop/PC/Pocket PC, you must use DA-LOG Datalogger Software.
1)
Ensure that the datalogging software has been loaded to the PC/laptop
or Pocket PC as required.
2)
Establish Bluetooth communications from the Wahl DHS520B to a
laptop/PC/Pocket PC.
3)
When Bluetooth communications is active, the Bluetooth logo on the
thermometer side display holds steady and a I0I0I icon appears (a
flashing logo indicates lost Bluetooth communications).
4)
Select the required Trigger Mode on the Wahl DHS520/520B.
5)
Press the trigger to capture and stream data, release the trigger to stop.
Note
To prolong battery life, always disconnect the serial
communications cable when not in use.
Page 34
Wahl DHS520
Advertisement
Table of Contents
