Thermometer Operation - Wahl Heat Spy DHS520 User Manual

Wahl DHS520

9.0 THERMOMETER OPERATION

CAUTION
Never look at the sun through this instrument - this could
cause severe damage to the eye.
When measuring temperatures above 1200° C/2192° F, a dark
filter must be fitted to the lens assembly.
Prior to temperature measurement, the thermometer must be set up as dictated
by the chosen application.
The setup procedure can be split into three different setup groups:
• Data Output Setup
• User Interface Setup
• Measurement Setup
The following list details the setup groups and the available selections.
Setup Group
Data Output Setup
User Interface Setup Trigger Mode
Measurement Setup Units
Page 28
Function
Trigger Mode
Bluetooth
Backlight
Sounder
Alarms
Emissivity
Averager Time Constant Fast / Mid / Slow
Window Compensation On (0.80 to 1.20) / Off
User Manual
Selection Options
Classic / History / Burst
On / Off
Classic / History / Burst
High (enter timer value)
Low (enter timer value)
Off
On / Off
High Alarm (enter set-
point values)
Low Alarm
Off
° C / ° F / K / ° R
(0.01 to 1.20)