Table of Contents
Advertisement
Wahl DHS520
5.0 THERMOMETER CONTROLS
5.1 ON/OFF Switch
315008
a
b
Fig. 8
5.2 Trigger Operation
315009
c
Fig. 9
5.3 LCD Display Panel & Keypad
d
315010
Fig. 10
Page 8
The On/Off switch is on the left-hand side of the
thermometer (see Fig. 3, item 6). The switch has two
push buttons, Off (a) and On (b).
A single press of the switch will activate/de-activate
the unit.
The Trigger (c) is on the thermometer handle (see Fig.
3, item 7). The trigger function depends upon the
chosen mode of operation: Classic, History or Burst.
In Classic mode, the trigger has one function, to read
and display temperature. In History and Burst modes,
the trigger activates advanced functions within the
thermometer (see Section 8.0).
The LCD display panel (d) is on the left-hand side of
the thermometer body (see Fig. 3, item 1). It operates
in two modes: Measure Mode and Menu Mode.
In Measure Mode, the scene temperature and
thermometer setup information (including battery life
indication) is displayed.
In Menu Mode, the function menus of the thermometer
can be accessed. You can select functions and set
the required parameters, as described in Section 7.0.
There are three action keys on the Keypad to the left
of the main display:
and
(Enter/select). These are used to navigate
around the various menus and displays.
(Scroll Up),
(Scroll Down)
User Manual
Advertisement
Table of Contents
