Data Streaming; Serial Communications - Wahl Heat Spy DHS520 User Manual

Portable infrared thermometer
Table of Contents

Advertisement

User Manual

10.0 DATA STREAMING

Data streaming provides flexibility in the retention of information captured by
the thermometer. It can be used in two separate ways: serially or wireless.

10.1 Serial Communications

To capture information from the Wahl DHS520 to a laptop/PC/Pocket PC,
DA-LOG Datalogger Software must be used.
Note
The 'Bluetooth' option must be disabled prior to using wired serial
communications from a Wahl DHS520B thermometer variant.
1)
Switch off Bluetooth communication (Wahl DHS520B variants only).
2)
Ensure that the datalogging software has been loaded to the PC/laptop
or Pocket PC as required.
3)
From the Wahl DHS520/520B, connect the serial cable to the
PC/laptop, or the Pocket PC as required.
4)
Select the required Trigger Mode on the Wahl DHS520/520B.
5)
Press the trigger to capture and stream data, release the trigger to stop.
Note
To prolong battery life, always disconnect the serial
communications cable when not in use.
Wahl DHS520
Page 33

Advertisement

Table of Contents
loading

This manual is also suitable for:

Heat spy dhs520b

Table of Contents