Advertisement
English
English
Safety of others
• Do not allow children or any person
unfamiliar with these instructions to use
the appliance.
• Do not allow children or animals to come
near the work area or to touch the
appliance or power supply cord. Close
supervision is necessary when the
appliance is used near children.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision
or instruction concerning use of the
appliance by a person responsible for
their safety.
• Children must be supervised to make
sure that they do not play with the
appliance.
After use
• Switch off the appliance before cleaning,
changing accessories or approaching
parts which move in use.
• Switch off and remove the plug from the
socket before leaving the appliance
unattended and before changing,
cleaning or inspecting any parts of the
appliance.
• When not in use, the appliance should
be stored in a dry place. Children should
not have access to stored appliances.
Inspection and repairs
• Before use, check the appliance for
damaged or defective parts. Check for
breakage of parts, damage to switches
and any other conditions that may affect
its operation.
• Do not use the appliance if any part is
damaged or defective.
• Have any damaged or defective parts
repaired or replaced by an authorised
repair agent.
• Before use, check the power supply cord
for signs of damage, ageing and wear.
• Do not use the appliance if the power
supply cord or mains plug is damaged or
defective.
• If the supply cord is damaged, it must be
replaced by the manufacturer or an
authorised Black & Decker Service
Centre in order to avoid a hazard.
• Never attempt to remove or replace any
parts other than those specified in this
manual.
Electrical safety
This tool is double insulated in
accordance with EN 60335;
therefore no earth wire is required.
Always check that the power supply
corresponds to the voltage on the rating
plate.
To avoid the risk of electric shock,
do not immerse the cord, plug or
motor unit in water or other liquid.
Features
1 Speed control switch
2 Motor housing
3 Stem
4 Blade
Unpacking
• Remove all packaging from the
appliance.
• Clean the appliance before first use.
Assembly
Warning! Before assembly, make sure that
the appliance is switched off and
unplugged.
-5-
Advertisement
