Advertisement
Although pitchbend and after-touch are not strictly controllers, when Controller number [Cn] mode is
selected, 'pb' will be displayed if a pitchbend message is received, and 'af' will be displayed if an after-
touch message is received.
If Controller value [Cv] mode is selected, and pitchbend or after-touch messages are received, their
values will be displayed.
When Receive channel & status [rC] mode is selected, the right hand 2 digits show the received MIDI
channel (if applicable) and the left hand digit operates as a received MIDI message indicator. LED
segments will flash when then following types of messages are received: Note on, Note off, Sysex,
Timing clock (MIDI clock), Start, Stop, Continue.
Any MIDI
message
Sysex
Note on
The top left dot (any MIDI message) operates in all modes, not just for Receive Channel & Status
mode.
To exit MIDI analyser mode, the power switch of the GPMX-16 must be turned off then on again.
Clock start
Clock stop
5
Clock
continue
MIDI clock
Note off
Advertisement
