Advertisement
When the required value has been set, either press the mode button again to select another
parameter, or press the edit button again. This will return you to normal operating mode again.
Whenever you return to Parameter mode the settings you have changed will be saved. Settings are
stored in non-volatile EEPROM memory.
Note also that the GPMX-16 will continue to function normally during the edit process, except that the
display will not indicate an activated input. The parameter names below also scroll across the display.
Edit parameters:
P10 'GP In Midi transmit channel' -
available values – 1 to 16 – default =1
P11 'GP In message type' -
available values – 'not' (notes) , 'con' (controllers) or 'prg (program changes) – default =notes
P12 'GP In 1 note number' -
8 follow consecutively) - available values 0 to 120 – default =36
P13 'GP In 1-8 off send' -
available values – yes or no – default =yes (note: program changes do not send off messages)
P14 'GP In 9 note number' -
to 16 follow consecutively) - available values 0 to 120 – default =44
P15 'GP In 9-16 off send' -
available values – yes or no – default =yes (note: program changes do not send off messages)
P16 'GP In debounce time' -
available values – 1 to 995 in 5mS steps – default =20 (value shown in milliseconds approx)
P17 'GP In On vel' -
sent - available values – 1 to 127– default =127
P20 'GP Out Midi rec channel' -
available values – 1 to 16 – default =2
P21 'GP Out message type' -
available values – 'not' (notes) , 'con' (controllers) or 'prg (program changes) – default =notes
P22 'GP Out 1 note number' -
(2 to 8 follow consecutively) - available values 0 to 120 – default =36
P23 'GP Out 1-8 pulse length' -
oFF & 1 to 250 – default =100 (values in milliseconds approx - see full description on next page)
P24 'GP Out 9 note number' -
(10 to 16 follow consecutively) - available values 0 to 120 – default =44
P25 'GP Out 9-16 pulse length' -
oFF & 1 to 250 – default =100 (values in milliseconds approx - see full description on next page)
P26 'GP Out CC data threshold' -
MIDI source is CCs – available values 1 to 127 – default 64
P30 'soft thru' -
set whether messages received at the MIDI Input are echoed to the MIDI outs
-available values – on or off – default on
select the MIDI transmit channel for all GP Inputs
set the output MIDI message type for all GP Inputs
set the note (or cont or prog) number for GP Input number 1 (2 to
set whether MIDI off messages are sent for GP Inputs 1 to 8
set the note (or cont or prog) number for GP Input number 9 (10
set whether MIDI off messages are sent for GP Inputs 9 to 16
sets the debounce value for all GP Inputs
set the On velocity value used for all GP Inputs when MIDI notes are being
select the MIDI receive channel for all GP Outputs
set the output MIDI message type for all GP Outputs
set the note (or cont or prog) number for GP Output number 1
set pulse length for GP Outputs 1 to 8 – available values
set the note (or cont or prog) number for GP Output number 9
set pulse length for GP Outputs 9 to 16 – available values
set the data value at which GP outputs turn on when the
3
Advertisement
