Related Manuals for Kenton GPMX-16
Summary of Contents for Kenton GPMX-16
- Page 1 GPMX GPMX- - - - 16 GPMX GPMX 16 MIDI to GPOs and 16 GPIs to MIDI Operating manual...
-
Page 2: Edit Mode
INTRODUCTION Welcome to the GPMX-16 - GPI to MIDI unit. The GPMX-16 is very easy to use, but please take a few moments to read through the manual to avoid any operational difficulties. CONNECTIONS DC IN 9V Plug the power adapter into here. The unit will take an adapter with an output of 9V either regulated or unregulated. - Page 3 Whenever you return to Parameter mode the settings you have changed will be saved. Settings are stored in non-volatile EEPROM memory. Note also that the GPMX-16 will continue to function normally during the edit process, except that the display will not indicate an activated input. The parameter names below also scroll across the display.
-
Page 4: Input And Output Connections
GPMX-16. MIDI analyser mode: The GPMX-16 has a built-in MIDI analyser function. This feature allows you to see what types of MIDI messages are being transmitted by your master keyboard/sequencer making the GPMX-16 a useful diagnostic tool. - Page 5 Note off Clock stop The top left dot (any MIDI message) operates in all modes, not just for Receive Channel & Status mode. To exit MIDI analyser mode, the power switch of the GPMX-16 must be turned off then on again.
-
Page 6: Factory Defaults
FACTORY DEFAULTS If you wish to reset your GPMX-16 to factory defaults, you can do so by turning the power on whilst holding down all three push buttons (mode, dec & inc). This will return the GPMX-16 to it’s default settings.