Tub Thermal Cutout (Tco) - GE GDWT668V Technical Service Manual

6. Disengage the motor hanger arm to remove the
motor pump assembly.

Tub Thermal Cutout (TCO)

The tub TCO trips at 165°F and it auto resets at
150°F.
The tub TCO is located under the tub behind the toe
kick panel.
To remove the tub TCO:
1. Disconnect power.
2. Remove the two 1/4-in. hex-head screws and
the access panel.
3. Remove the two 1/4-in. hex-head screws and
the shield.
Shield
4. Slide the tub TCO off the bracket.
Note: When replacing the tub TCO, splice a new
thermostat into the harness using connectors and
procedures approved for damp/wet conditions.
Silicone Grease
– 36 –
Tub TCO