Instruction
Manual
MM200
ENGLISH
• Backlight
• kick Stand
• lead
holder
• auto
FUNC.
ranging
• data hold
• 3-3/4 digit
3999 count
lcd
www.kleintools.com
MM200
HOLD
H
z%
H
z%
Temp
µA
mA
A
Temp
m
COM
600V MAX
~
~
10A/250V
400mA/250V
engliSh
MM200
instruction Manual
general SPeciFicationS
The Klein Tools MM200 is an auto-ranging multimeter. It measures
AC / DC voltage, AC / DC current, resistance, capacitance, temperature,
and frequency. It can also test diodes and continuity.
•
operating altitude:
2000 meters
•
relative humidity:
75% max operating
•
operating temperature:
0°C / 32°F to 40°C / 104°F < 75% R.H.
•
Storage temperature:
-20°C / -4°F to 60°C / 140°F < 80% R.H.
•
accuracy temperature:
18°C / 64°F to 28°C / 82°F < 75% R.H.
•
0.1*(specified accuracy) / °C
temperature coefficient:
•
Sampling Frequency:
3 samples per second
•
5.91" x 2.76" x 1.97"
dimensions:
•
Weight:
8.36 oz.
•
Accurate for one year
calibration:
•
cat rating:
CAT III 600V
•
ETL & cETL standard UL 3111-1 listed
listing:
•
Pollution degree:
2
•
accuracy:
± (% of reading + # of least significant digits)
WarningS
To ensure safe operation and service of the tester, follow these instructions.
Failure to observe these warnings can result in severe injury or death.
• Before each use, verify meter operation by measuring
a known voltage or current.
• Never use the meter on a circuit with voltages that exceed the
category based rating of this meter.
• Do not use the meter during electrical storms, or in wet weather.
• Do not use the meter or test leads if they appear to be damaged.
• Ensure meter leads are fully seated, and keep fingers away from
the metal probe contacts when making measurements.
• Do not open the meter to replace batteries while the probes
are connected.
• Use caution when working with voltages above 60V DC,
or 25V AC RMS. Such voltages pose a shock hazard.
• To avoid false readings that can lead to electrical shock,
replace batteries if a low battery indicator appears.
• Unless measuring voltage or current, shut off and lock out
power before measuring resistance or capacitance.
• Always adhere to local and national safety codes. Use individual
protective equipment to prevent shock and arc blast injury where
hazardous live conductors are exposed.
Need help?
Do you have a question about the MM200 and is the answer not in the manual?
Questions and answers