Table of Contents
Advertisement
1998 to Present: Ultra Glide Rear Speakers
1 If not already attached, crimp contact pins to Sony harness rear
speaker wires (green and purple outputs). Respect polarity. For
more information see pages 8-9.
2 Use heat shrink tubing to insulate crimp portion of contact pin.
3 Insert contacts according to wire map and picture below.
4 Ensure no shorting!
5 Fasten using tape or zip ties such that pins do not come loose.
Note: Harley-Davidson part number for pins: 72190-94
Position 2
Position 25
Green w/ Black Stripe
Position 4
Purple w/ Black Stripe
Position 11
Purple
Green
Purple w/ Black Stripe
Green w/ Black Stripe
Position 10
14
Position 1
Purple
Position 24
Position 3
Green
Hide quick links:
Advertisement
Table of Contents
