Installation; Installing The Hardware Port On The Panasonic Fax/Mfp Machine; Installing The Local Firmware Update Tool - Panasonic DP-C305 Service Manual

Local Firmware Update Tool (Parallel /USB Port)

2. Installation

2.1

Installing the Hardware Port on the Panasonic Fax/MFP Machine

Depending on the model, either a Parallel Port or a USB Port is required in the machine.
1
If the machine is not already equipped with one of these ports please install an optional Parallel
Port/USB Port Assembly into the supporting Panasonic Fax/MFP models by following the
appropriate option installation instructions for that model.
Prepare the Parallel cable or USB cable for connecting the Panasonic Fax/MFP and your PC.
2
Important: For the USB port models, do not connect the USB cable yet.
2.2

Installing the Local Firmware Update Tool

Start Microsoft Windows.
1
Log on to the computer from an account with Administrator privileges.
Important: For the USB port models, do not connect the USB cable yet.
Locate and Run the Setup(.exe) program in the Firmup folder contained in the software setup
2
disk or folder.
Follow the instructions on your screen to install the program.
3
Note:
The "Digital Signature Not Found" or "Software Installation" window will be displayed during the
installation and indicate "Unknown software package" or "not passed Windows Logo testing", please click
[YES] or [Continue Anyway] button to continue the installation.
A confirmation message is displayed when the installation is completed.
4
When prompted to do so, allow the program to restart your PC.
Page 4