Removing The Waste-Full Photo Sensor Pcb; Removing The Waste Full Led Pcb - Panasonic DP-C305 Service Manual

[2]
[3]
[2]
[1]
Ver. 1.1
[1]
Fig. 3-091
[4]
Fig. 3-092
[3]
Fig. 3-093

2-4. Removing the Waste-Full Photo Sensor PCB

(1) Remove the Punch Controller PCB. (See
Removing the Punch Controller PCB)
(2) Remove 2 Screws [1] to remove the PCB Film
[2].
(3) Disconnect the Connector [3] to remove the
Waste-full Photosensor PCB [4].

2-5. Removing the Waste Full LED PCB

(1) Remove 1 Screw [1].
(2) Disconnect the Connector [2] to remove the
Waste-full LED PCB [3].
839
DP-C405/C305/C265
FEB 2008