The Basics;
Channel parameter pop-ups. From Single Channel View.
From the single channel view you can access all the channel parameter pop-ups and use the encoders below to
make parameter changes. Just press the relevant area of the screen.
Note; Most Popups can be accessed
Note;
from several different places.
Use the encoders below the screen to operate the highlighted knobs
on the screen. Where there are more than one row of knobs touch the
screen; the white rings show which row will be controlled.
Tip; Try turning the knob whilst pushing to get 'fi ner resolution'.
Tip;
M7CL Quick Start Guide Part 1
11