Auto Restart Setting
This product is designed so that, after a power failure, it
can restart automatically in the same operating mode as
before the power failure.
Information
The product was shipped with Auto Restart function in
the off position. Turn it on as required.
How to set the Auto Restart
1. Press and hold the TEMPORARY button on the signal
receiving unit for 3 seconds to set the operation (3
beep sound and OPERATION lamp blink 5 time/sec
for 5 seconds).
2. Press and hold the TEMPORARY button on the signal
receiving unit for 3 seconds to cancel the operation (3
beep sound but OPERATION lamp does not blink).
EN-33
– 17 –
Installation Manual