Timex W223 Manual page 126

ENGLISH
FOLLOWED BY
WILL
THE CURRENT
APPEAR
ALARM SETTING
FOR 3
TIME AND TIME
SECONDS
ZONE.
TO SET DAILY ALARM
1) PRESS pusher "A" to bring up DAILY ALARM dis-
play: "ALARM" will appear for 3 seconds followed
by the current alarm setting time and time zone.
The ALARM mode symbol "AL" and the applicable
time zone symbol "T1" or "T2" alternate to give
complete information.
2) PRESS pusher "D" to let time zone flash.
3) PRESS pusher "C" to select time zone.
4) PRESS pusher "A" to let hour flash.
5) PRESS pusher "C" to advance hour.
6) PRESS pusher "A" and "C" as above to adjust tens
of minutes and minute.
7) PRESS pusher "D" to complete setting.
8) Alarm is automatically activated after setting
S is displayed.
10
ENGLISH
NOTE:
• When the alarm sounds, it will beep for 20
seconds.
• To stop the alarm beep, PRESS any pusher.
• PRESS and HOLD pusher "C" for 2 seconds in
setting mode, to activate fast advance.
11