Advertisement
MP-3V Light Duty Riveter / 39045
This newly designed light-duty air/hydraulic riveter is ergonomically
designed with the professional in mind. The light weight 2.9 lbs.
well balanced MP-3V includes a Vacuum System and is designed
to maximize a 3/4" stroke and 1,800 lbs. of pulling force along with
a 3 jaw setup that gets the job done. The air supply can be
connected directly or you can use the supplied air connection with
the attached hose for operator convenience. Each tool is supplied
with nosepieces to set 3/32"- 3/16" rivets in all alloys, adjustment
service wrenches, hydraulic fluid, fluid applicator, spare jaws and a
removable swivel air connection line with an air off/on valve built in.
The adjustable Vacuum System control located inside the mandrel
collection bottle allows you to control the force of the air needed to
hold the rivet in place or you may operate with the vacuum system
turned off. Recommended air pressure is 60-95 PSI.
Alcoa Fastening Systems
1925 N MacArthur Dr
Suite 200
Tracy, CA 95376
LA-532
Advertisement
Table of Contents
Related Manuals for Alcoa MP-3V 39045
Summary of Contents for Alcoa MP-3V 39045
- Page 1 Recommended air pressure is 60-95 PSI. Alcoa Fastening Systems 1925 N MacArthur Dr Suite 200...
- Page 2 WARNING: ALWAYS WEAR SAFETY GLASSES WHEN OPERATING AND PERFORMING MAINTENANCE ON TOOL ADDITION OF HYDRAULIC Use only compressed air. Check airline for damage from humidity & contaminants. In order to protect the tool from premature wear, we recommend the use of a filter, lubricator & regulator. Air connection size ¼” NPT. WARNING: Do not use air supply greater than recommended or tool may be damaged or burst.
- Page 3 system you can turn the vacuum system clockwise to shut it off. The tool will still be able to set rivets, but it must be tilted backwards to allow spent mandrel to fall into nail container. WARNING: ALWAYS WEAR SAFETY GLASSES WHEN OPERATING AND PERFORMING MAINTENANCE ON TOOL ADDITION OF HYDRAULIC FLUID Tool is shipped with oil.
- Page 4 WARNING: ALWAYS WEAR SAFETY GLASSES WHEN OPERATING AND PERFORMING MAINTENANCE ON TOOL CHANGING NOSEPIECES After selecting the correct size nosepiece for the rivet being used Connect tool to air supply and pull trigger and hold trigger button. 2. Using wrench (supplied), unscrew nosepiece from frame head & replace with proper size nosepiece.
- Page 5 Should this tool fail during this ninety (90) day period, and no unauthorized repairs have been made, return the tool freight prepaid to the factory for free of charge replacement of any part or parts found by Alcoa Fastening System - Marson division to be defective due to faulty material or workmanship.
- Page 6 Part Part Part AFS Part No. Description AFS Part No. Description AFS Part No. Description Number Number Number Part M95200 3/32" NOSEPIECE M95238 AIR INTERFACE AFS Part No. Description Number M95201 1/8" NOSEPIECE M95239 TIE RING M95202 5/32" NOSEPIECE M95240 AIR TUBE M95203 3/16"...
Need help?
Do you have a question about the MP-3V 39045 and is the answer not in the manual?
Questions and answers