Easy Print - Canon PowerShot G7 X Mark II User Manual

Printing Images
Print your shots and configure a variety of settings used for your printer
or photo printing services by connecting the camera to a PictBridge-
compatible printer with a cable.
A Canon SELPHY CP printer is used in this example of PictBridge
printing. Also refer to your printer user manual.

Easy Print

Print your shots by connecting the camera to a PictBridge-compatible
printer with a USB cable (sold separately; camera end: Micro-B).
1
Make sure the camera and printer
are off.
2
Connect the camera to the printer.
Open the terminal cover. Holding the
z
smaller cable plug in the orientation
shown, insert the plug fully into the
camera terminal.
Connect the larger cable plug to the
z
printer. For other connection details, refer
to the printer manual.
3
Turn the printer on.
4
Choose an image.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose an image.
Still Images Movies
Still Images Movies
5
Access the printing screen.
Press the [ ] button, choose [ ], and
z
press the [ ] button again.
6
Print the image.
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Print], and then press the
[ ] button.
Printing now begins.
z
To print other images, repeat the above
z
procedures starting from step 4 after
printing is finished.
When you are finished printing, turn the
z
camera and printer off and disconnect
the cable.
● For Canon-brand PictBridge-compatible printers (sold separately),
see "Printers" ( = 179).
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
184