Table of Contents
Advertisement
If the [Device Nickname] screen is
z
displayed, press the [ ][ ] buttons or
turn the [ ] dial to choose [OK], and then
press the [
] button.
3
Choose [
].
Press the [ ][ ][ ][ ] buttons or turn
z
the [ ] dial to choose [
], and then
press the [
] button.
4
Choose [Add a Device].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [Add a Device], and then
press the [
] button.
5
Choose [WPS Connection].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [WPS Connection], and
then press the [
] button.
6
Choose [PBC Method].
Press the [ ][ ] buttons or turn the [ ]
z
dial to choose [PBC Method], and then
press the [
] button.
7
Establish the connection.
On the access point, hold down the WPS
z
connection button for a few seconds.
On the camera, press the [
] button to
z
go to the next step.
The camera connects to the access point
z
and lists devices connected to it on the
[Select a Device] screen.
8
Choose the target device.
Choose the target device name (either
z
press the [ ][ ] buttons or turn the [ ]
dial), and then press the [
] button.
9
Install a driver (first Windows
connection only).
When this screen is displayed on the
z
camera, click the Start menu on the
computer, click [Control Panel], and then
click [Add a device].
Double-click the connected camera icon.
z
Driver installation will begin.
z
After driver installation is complete, and
z
the camera and computer connection
is enabled, the AutoPlay screen will be
displayed. Nothing will be displayed on
the camera screen.
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
150
Hide quick links:
Advertisement
Table of Contents
