Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Operating Manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Genelec aiw26b
Summary of Contents for Genelec aiw26b
- Page 1 AIW26B Operating Manual...
-
Page 2: Installation
The matching units are marked with If there is a problem with the product, the same ID number on the reflex port of the contact your local Genelec dealer. AIW26B and the top panel of the RAM1. Loudspeaker placement • AIW26B loudspeaker unit with two mounting brackets attached. - Page 3 If the AIW26B loudspeakers are used obstructions between the loudspeaker Home Theater system, you may actually in an application where their capability for and the listener.
- Page 4 Take a hold of the middle screws and to find the location for the AIW26B. The in if the location is unsuitable. If you find lift the loudspeaker a little (Figure 15)
- Page 5 Figure 10. Check the polarity of the loudspeaker cables and attach the cables to the binding posts of the loudspeaker. Figure 11. When the cables are connected, Figure 12. Lift the loudspeaker into the hole lift the loudspeaker out. top end first. Figure 13.
- Page 6 LOUD- MOUNTING SPEAKER FLANGE WALL Figure 16. Correct positioning of the mounting flange. Note that the flange, not the loudspeaker enclosure is in Figure 17. Tighten the middle screws first using a Torx 30 bit. Hold the enclosure and contact with the wall. mounting flange in place by gripping the other middle screw as shown above.
- Page 7 (see Fig. 22). Check that the amplifier’s unit generate a large amount of heat when Accordingly, there are two pairs of binding serial number matches that of the AIW26B used at full power. To avoid overheating, posts, white (-) and red (+) for the tweeter loudspeaker enclosure which it will power.
-
Page 8: Setting The Input Sensitivity
Autostart function or by a remote Figure 23. Minimum space requirement the adjustment. The manufacturer default control unit (not included in the AIW26B of the RAM1 amplifier when not setting for this control is -6 dBu (0.389V, system). If the system is left unused for installed with Genelec RM1 rack mount. -
Page 9: Maintenance
Automatic protection circuits WARNING! The AIW26B system has protection circuits against loudspeaker driver thermal overload This equipment is capable of delivering Sound and amplifier overheating. The protection Pressure Levels in excess of 85 dB, which system resets automatically so the user only may cause permanent hearing damage. - Page 10 AIW26B LOUDSPEAKER UNIT RAM1 AMPLIFIER UNIT Lower cut-off frequency, -6 dB: < 39 Hz Bass amplifier output power: Short term 120 W Upper cut-off frequency, -6 dB: > 25 kHz Treble amplifier output power: Short term 120 W Accuracy of frequency response, (±2.5 dB): 45 Hz...21 kHz...
- Page 11 327 (12 7/8 in) 4 (3/16 in) 350 (13 3/4 in) 89 (3 1/2 in) 30 (1 3/16 in) (4 3/4 in) (22 5/8 in) (21 in) (25 3/4 in) 20 x 20 (2 3/8 in) (6/8 x 6/8 in) Figure 27.
- Page 12 AIW26B Operating Manual www.genelec.com Genelec Document D0132R001. Copyright Genelec Oy 1.2016. All data subject to change without prior notice International enquiries: In the U.S. please contact: In China please contact: Genelec Oy, Olvitie 5 Genelec, Inc., 7 Tech Circle Beijing Genelec Audio Co, Ltd.
Need help?
Do you have a question about the aiw26b and is the answer not in the manual?
Questions and answers