Table of Contents
Advertisement
Disassembling/Assembling the Cover panel for indoor unit installation
Removing the hooks on the side
①
Caution (fragile)
- Gently press the both side of the cover
panel inwards (①) and release the
hooks on both sides(②) .
Assembling the Cover panel (After mounting the indoor unit)
To assemble the Cover panel, proceed in reverse order of disassembling .
Use both hands for assembling and be extra careful not to damage the pipes and drain hose .
Lock the side, center, and bottom hooks in this sequence . Tighten the bottom panel with the screws, and close
the screw holes with their cap .
NA_BETTER_A3050_IB&IM_EN_DB68-04388A-00.indd 38
Removing the hooks on the central part
①
②
Caution (fragile)
English-38
- Use both hands
- Release each hook by pushing it up at an angle .
<Lock the side hook>
<Lock the bottom hook>
<Fasten the screw>
<Assemble the Cap screw>
12/23/2013 10:25:30 PM
Advertisement
Table of Contents
