Tools Needed - Ryobi rts31 Operator's Manual

BLADES
For maximum performance, it is recommended that you use
the 10 in. carbide-tipped combination blade provided with
your saw. Additional blade styles of the same high quality are
available for specific operations such as ripping. Your local
dealer can provide you with complete information.
Blade kerf width must be within the limits stamped on the
riving knife.
The following tools (not included) are needed for assembly and making adjustments:
COMBINATION
SQUARE
FEATURES
Do not use blades rated less than the speed of this tool.
Failure to heed this warning could result in personal
injury.

TOOLS NEEDED

FRAMING SQUARE
PHILLIPS
SCREWDRIVER
FLATHEAD
SCREWDRIVER
ADJUSTABLE WRENCH
HEX KEY (3 mm)
12
WARNING:
C-CLAMPS
Fig. 4