Pioneer N-70A Operating Instructions Manual page 15

Network audio player

Hide thumbs Also See for N-70A:

Enlarged version

Troubleshooting (Windows 8/8.1)

When using Windows XP ,

see page 5

; for Windows Vista,

page

11.

1. No sound

Do not boot your computer's music player program if the power is turned off to the device with the

USB DAC port, or if the USB DAC port has not been selected as the input source.

Boot your computer's music playing program only after switching the input to the USB DAC port.

For information about the name of inputs supported by the USB DAC port, see the Operating

Instructions for this device.

Simultaneously press the [Windows] key and [X] key, then select

[Device manager].

Click on [Sound, video and game controllers] and conﬁ rm that [Pioneer

N-70A N-50A USB Audio] is listed.

If the [Pioneer N-70A N-50A USB Audio] does not appear, conﬁ rm that the USB DAC port

has been selected as input source. Then try reconnecting the cable or turning the power

off and then on again; when this is done, the [Pioneer N-70A N-50A USB Audio] should be

recognized.

see page 7

; for Windows 7,

see

Procedure continues.

Click on [Universal Serial Bus controllers], and conﬁ rm that [USB Composite

Device] is listed.

Simultaneously press the [Windows] key and [X] key; select [Control Panel],

then click on [Hardware and sound]  [Manage audio devices].

If the menu items noted above do not appear, conﬁ rm that the Control Panel's View by item

is set to "Category".

Procedure continues.

N-50a