Toshiba E-studio 281c User Functions Manual page 63

6
Enter new 5-digit code in the "New Code" field using the digital keys,
and then press the [SET] button to set the entry.
• If you enter the code, asterisks (*) appear in the "New Code" field.
• If you want to clear the code to retype it, press the [CLEAR] button on the Control Panel.
• After pressing the [SET] button, the "Retype New Code" field is highlighted.
The department code must be the 5-digit code except "00000".
If you want to return to the "Current Code" field to retype it, press the [RESET] button.
7
Enter new 5-digit code again in the "Retype New Code" field using the
digital keys, and then press the [SET] button to set the entry.
• If you enter the code, asterisks (*) appear in the "Retype New Code" field.
• If you want to clear the code to retype it, press the [CLEAR] button on the Control Panel.
If you want to return to the "Current Code" field or "New Code" field to retype them, press the [RESET] button.
8
Press the [ENTER] button at the bottom of the touch panel.
• The LIMITATION screen is displayed.
2
61