Anadex DP-9000 Operator's Manual page 51

3., 3 ~ 2
IN-LINE CON'TROL CODES: These codes cause a printing
record to be' opened or closed as indicated, and an appropriate
printing action to take place.
ANY PRINTABLE
ASCII
CHARACTER
FORMAT
CO}1MANDS
SO
SI
RS
US
HT
- Causes a printing record to be opened.
That character and all subsequent
characters received while the record is
open will be printed when the record is
closed.
- These are part of a printing record, and
when received, if a printing record is
not open, will cause the record to be
opened and become the first entry. If
the record is open, they are acted upon.
- ASCII Code 14 - start double width
printing. Automatically cancelled by LF
or other record closing code except by
wraparound action.
- ASCII Code
15 -
end double width print-
ing~
If a printing record is closed
while in double width, an SI is auto-
matically inserted to default to single
width except on wraparound.
- ASCII Code 30 - start underline.
- ASCII Code
31 -
end underline. If a
record i.s c.losed while underlining, a
US is automatically inserted, except.on
wraparound.
- ASCII Code 9 - causes blanks (spaces)
to be inserted to the next right Hori-
zontal Tab stop. If there is no tab
stop set between current position and
maximum right column, or no tab set at
all, the code will be ignored.
3-13