To prevent other bridged terminals from entering
a call (on a per call basis)
1 Press the softkey below Excl while active on a call
or Press [
] while connected to the call.
Excl xxxxx
NOTE: Pressing the softkey below Excl or
pressing [
] again reactivates bridging.
Excl xxxxx
CALL COVERAGE/CONSULT
To answer a call for a coworker for whom you are
a coverage point
1 Press [
] of incoming call when ring begins
xxxxx
or green light flashes.
To talk privately with a coworker after answering
a redirected call
1
Press [
].
Transfer
Call is put on hold.
2
Press the softkey below Cnslt
or Press [
]
Consult
or Dial coworker's extension.
3
Discuss call, if appropriate.
4
If coworker is not available, press the fluttering
[
] to reconnect to the call
xxxxx
or Press [
] again to send call to coworker
Transfer
or Press [
] to make it a 3-party call.
Conf
CALL FORWARDING — FOLLOW ME
To temporarily redirect all calls to an extension
or outside number
1
Press softkey below CFrwd
or Press [
]
Call Fwd
or Dial Call Forward access code
2
Dial extension or number where calls will be sent.
3
Hang up.
To cancel Call Forwarding
1 While off-hook, press softkey below CFrwd
or Press [
] again
Call Fwd
or Dial Call Forward cancel code
2 Hang up.
4
CALL PARK
To park a call at your extension (for retrieval
at any extension)
1
Press [
Transfer
2
Dial Call Park trunk group access
code
.
3
Dial Call Park zone number.
4
Dial an idle Answer-Back channel number.
5
Press [
Recall
6
Press [
Transfer
7
Hang up.
To retrieve a parked call from any extension
1 Dial Answer Back access code .
2
Dial channel number where call is parked.
CALL PICKUP
To answer a call placed to a member of your
pickup group
1 Press [
Call
or Dial Call Pickup access code
CONFERENCE
To add another party to a call (for a total of up
to three parties)
1
Press [
].
Conf
2 Dial number of new party and wait for answer or
press call appearance of held call.
3 Press [
] again.
.
Conf
To drop the last party added to a conference call
1 Press [
].
Drop
.
].
].
] again.
.
]
Pickup
.
5
Need help?
Do you have a question about the Voice Terminal 6434 and is the answer not in the manual?