Cleaning And Maintenance; Warranty - Gardenline 50752 User Manual

1200W Lawn Edger

Cleaning and Maintenance

WARNING: Use only mild soap and a damp cloth to clean the edger.
Never allow any liquid to get inside the edger, never immerse any part
of the tool into a liquid.
Preventing Corrosion
Fertilizers and other garden chemicals contain agents that greatly accelerate
the corrosion of metals. If you use the edger in areas where fertilizers or
chemicals have been used, the edger should be cleaned immediately
afterwards. Wipe all exposed parts with a damp cloth. You may lubricate
only metal parts with a light petroleum based oil. When cleaning, never
immerse in water or squirt it with a hose.
General inspection
Regularly check that all the fixing screws are tight. They may vibrate loose
over time.
Repairs
If the supply cord is damaged or worn it must be replaced by an authorised
service agent or a similarly qualified person in order to avoid hazard.
A listing of our service agents can be found at www.powertoolsupport.com,
then click on the "Service Agent" link.

Warranty

Your new Gardenline® 1200W Lawn Edger will more than satisfy your
expectations. It has been manufactured under stringent Gardenline®
Quality Standards to meet superior performance criteria.
You will find your new 1200W Lawn Edger easy and safe to operate, and,
with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before
using your new Gardenline® 1200W Lawn Edger.
Take special care to heed the Cautions and Warnings.
Your Gardenline® 1200W Lawn Edger has many features that will make your
job faster and easier. Safety, performance, and dependability have been
given top priority in the development of this 1200W Lawn Edger, making it
easy to maintain and operate.
AFTER SALES SUPPORT
1800 909 909
(toll free)
Operating instructions and safety notes!
e-mail: help@powertoolsupport.com
MODEL: №. 50752 • 10/2015 • 50752
21