Power Management Setup - ECS 945GSED-I User Manual

Onboard 10/100M Boot ROM (Disabled)
Use this item to enable or disable the boot function using the onboard 10/100M LAN
Boot ROM.
Onboard GbE LAN (Enabled)
Use this item to enable or disable the OnBoard GbE LAN function.
Onboard GbE Boot ROM (Disabled)
Use this item to enable or disable the boot function using the onboard GbE LAN Boot
ROM.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Parallel Port Address (378)
Use this item to enable or disable the onboard Parallel port, and to assign a port
address.
Parallel Port Mode (Normal)
Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).
Parallel Port IRQ (IRQ7)
Use this item to assign IRQ to the parallel port.
Serial Port1/2/3/4/5/6/7/8 Address (3F8/2F8/3E8/2E8/2F0/2E0/2D8/2D0)
Use this item to enable or disable the onboard serial port, and to assign a port address.
Serial Port1/2/3/4/5/6/7/8 IRQ (4/3/4/3/11/10/11/10)
Use this item to assign IRQ to the serial port.
Press <Esc> to return to the main menu setting page.

Power Management Setup

This page sets up some parameters for system power management operation.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Power Management Setup
ACPI Suspend Type
PWRON After PWR-Fail
Power On by Ring
Resume By PCI/Lan PME
Resume By USB (S3)
Resume By PS2 KB (S3)
Resume on RTC Alarm
: Move
Enter : Select
F1:General Help
S3 (STR)
Power Off
Disabled
Disabled
Select the ACPI
Disabled
state used for Sys-
Disabled
tem Suspend.
Disabled
+/-: Value
F10: Save and Exit ESC: Exit
F9: Optimized Defaults
Using BIOS
37
Help Item
Options