Memory - MSI Fuzzy 945GME1 Series Hardware User Manual

MS-7265 Mainboard

Memory

These DIMM slots are used for installing memory modules.
DDR2
240-pin, 1.8V
Installing Memory Modules
1. The memory module has only one notch on the center and will only fit in the
right orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
Important
You can barely see the golden finger if the memory module is
properly inserted in the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-6
64x2=128 pin
Volt Notch
56x2=112 pin