Storing Memory Numbers; Storing A Pause In A Memory Number; One-Touch Dialing; Dialing Numbers In Memory - AT&T Trimline 260 User Manual

260book_1ATT 4/24 4/24/02
Two-Touch Dialing
For two-touch
dialing:
1 Lift the handset.
2 Press and release
M, then press
the number button
(0-9) where the
memory number is
stored. The
number appears
on screen as it is
dialed.
Storing Memory
Numbers
1 Lift the handset.
2 Press and release p.
3 Dial the telephone
number (up to 24 digits)
— OR —
Press
number dialed from this phone.
4 For one-touch dialing, press and release the memory button where
you want to store the number (locations X, Y, and Z)
— OR —
For two-touch dialing, press M, then press the number button
(0–9) where you want to store the number.
6:24 PM Page 19
TELEPHONE MEMORY
to store the last
NOTE: Press
on the back of the
handset while storing
a memory number to
exit programming.

One-Touch Dialing

For one-touch dialing,
lift the handset and
press the memory
button. The number
appears on screen as it
is dialed.
Storing a Pause in a
Memory Number
Press and release
once to
store a 2.5-second
pause in the dialing
sequence, twice for a
5.0-second delay,
three times for a
7.5-second delay.
NOTE: Each 2.5 second
pause counts as one digit
when storing numbers in
telephone memory.
19