Storing Numbers In Memory - AT&T Trimline TR1909 Quick Start Manual

Storing numbers in memory

This telephone has 1 memory locations with three
one-touch memory location buttons (M1, M2, M3) and
10 speed dial memory locations (0 through 9). Each
location can hold a number up to 2 digits.
To store a number in a one-touch memory location
Follow the steps below to store a number in a one-touch memory
location:
Lift the handset and press PROG.
1.
2. Use the dialing keys to enter the number you
want to store. Press PAUSE/
store a three-second pause in the dialing
sequence, twice for a six-second pause
and so on.
- OR -
Press
PAUSE
number dialed.
. Press the one-touch memory location
button (M1, M2 or M3) where you want
the number to be stored. The screen
briefly displays EX, where X is the memory location.
NOTES:
• When you store a new number in a one-touch memory location, the old entry is
replaced and cannot be retrieved.
• If no action is taken within 10 seconds, the telephone returns to idle mode
automatically without saving your selection.
/REDIAL to store the last
once to
REDIAL
12
10 : 0 12/01
AM
Pro
888882445
10 : 0 12/01
AM
E1 Pro
888882445