Preparation; Descaling Cycle - Philips HD8650 User Manual

Preparation

1 Switch off the machine.
If you do not switch off the machine, you cannot enter the descaling
cycle.
2 Empty the drip tray and place it back.
3 Empty the water tank and remove the Intenza+ water filter
(if present). Pour the entire bottle of descaling solution into
the water tank.
4 Add water to the descaling solution in the water tank up to
the MAX indication.
5 Place a bowl under the coffee spout.

Descaling cycle

1 Press the coffee button for approximately 5 seconds.
The orange descaling light flashes slowly during the entire descaling
,
cycle.
After each interval of one minute, the descaling solution flows out
,
of the coffee spout. This happens several times until the water tank
is completely empty.
Note: If you want to interrupt the flow of the descaling solution press the
coffee button.To restart the flow of the descaling solution, press the coffee
button again.
2 The 'water tank empty' light lights up continuously.
3 Empty the drip tray and place it back.
ENGLISH
19