Table of Contents
Advertisement
Chapter 1
Get to Know About Your Powerline Extender
1 3 2
Physical Interface
Power Plug
LED Button
Wi-Fi Button
Ethernet Port
Pair Button
Reset Button
LED Button
Press and hold the LED button for 1 second to turn all LEDs on or off. All LEDs are on by
default. If you don't feel like being bothered by the LED light at night, press and hold
the button for 1 second to turn all LEDs off. The next morning, just press and hold the
button again to turn them on.
Wi-Fi Button
Press and hold the button for 1 second to copy wireless settings from the main router
to the extender. Go to
Wi-Fi Clone
for more information.
Press and hold the button for 5 seconds to turn the wireless function on or off. The
wireless function is on by default. You can turn them off at night and then on in the
morning by pressing the Wi-Fi button.
Pair Button
Press and hold the button for 1 second to join a powerline network. Go to
To Set Up a
New Secure Wireless Network
for more information.
Press and hold the button for 8 seconds to leave the existing powerline network.
Reset
Use a pin to press and hold the Reset button for 5 seconds to reset the powerline
extender to factory default settings. When Reset is triggered properly, all LEDs will turn
off and start on again.
5
Hide quick links:
Advertisement
Table of Contents
