Upgrade The Firmware - TP-Link TL-WPA4530 User Manual

Chapter 3
3. Select the correct
time zone.
4. Click Save.
3 11 3

Upgrade the Firmware

TP-LINK is dedicated to improving and richening the product features, giving you a
better network experience. We will release the latest firmware at TP-LINK official
website, you can download the latest firmware file from our website:
and upgrade the firmware to the latest version.
1. Download the latest firmware file for the extender from our website:
com.
Note: The upgraded firmware version must correspond to the hardware.
2. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the username and password you set for the extender.
3. Go to System Tools
4. Click Browse to locate the downloaded new firmware file, and click Upgrade.
5. Wait a few minutes for the upgrading and rebooting.
Note:
1. Before upgrading the firmware, it's better to back up your current settings.
2. During the upgrading process, do not turn off or reset the extender.
3 11 4 Backup and Restore Configuration Settings
The configuration settings are stored as a configuration file in the extender. You can
back up the configuration file to your computer for future use and restore the extender
to a previous settings from the backup file when needed. Moreover, if needed you can
erase the current settings and reset the extender to the default factory settings.
To backup configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in
with the username and password you set for the extender.
2. Go to System Tools
End date and time when daylight saving time ends at your local
> Firmware Upgrade
> Backup & Restore
Configuring via Web Management Interface
page.
page.
www.tp-link.com
www.tp-link.
30