Asus 4G-AC55U User Manual page 94

Dual-band wireless-ac1200 lte modem router
Hide thumbs Also See for 4G-AC55U:
Table of Contents

Advertisement

To set up the System settings:
1. From the navigation panel, go to Advanced Settings >
Administration > System tab.
2. You can configure the following settings:
• Change router login password: You can change the
password and login name for the wireless router by entering
a new name and password.
• Time Zone: Select the time zone for your network.
• NTP Server: The wireless router can access a NTP (Network
time Protocol) server in order to synchronize the time.
• Enable Telnet: Click Yes to enable Telnet services on the
network. Click No to disable Telnet.
• Authentication Method: You can select HTTP, HTTPS, or
both protocols to secure router access.
• Enable Web Access from WAN: Select Yes to allow devices
outside the network to access the wireless router GUI
settings. Select No to prevent access.
• Auto Logout: System will auto log out the administration
page after an idle period. To disable Auto logout, set the
value in 0.
• Enable WAN down browser redirect notice: When WAN
connection is down, the system will pop up a screen to guide
to how to configure the WAN connection. If you don't like to
see this notice, select No to disable the notice.
• Allow only specified IP address: Click Yes if you want to
specify the IP addresses of devices that are allowed access to
the wireless router GUI settings from WAN.
• Specified IP Address: Enter the WAN IP addresses of
networking devices allowed to access the wireless router
settings. This Client list allows you to add the maximum IP
addresses of 4.
3. Click Apply.
94

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents