Table of Contents
Advertisement
the ping test counter and getting no response from the target
IP address.
• Enable User-defined Target: Select Yes when you want to
manually define the target IP address or FQDN (Fully Qualified
Domain Name) for the ping test packet.
4.3.4 Port Trigger
Port range triggering opens a predetermined incoming port for a
limited period of time whenever a client on the local area network
makes an outgoing connection to a specified port. Port triggering
is used in the following scenarios:
• More than one local client needs port forwarding for the
same application at a different time.
• An application requires specific incoming ports that are
different from the outgoing ports.
To set up Port Trigger:
1. From the navigation panel, go to Advanced Settings > WAN
> Port Trigger tab.
55
Hide quick links:
Advertisement
Table of Contents
