Memory Seats; Ultraview Sunroof - Cadillac 2016 CT6 Convenience/Personalization Manual

MEMORY SEATS

Set Memory Positions
With the ignition On or in Accessory mode:
1. Adjust the driver's seat, power outside mirrors and power steer-
ing column to the desired positions.
2. Press and release the SET button on the driver's door. A
beep will sound. Immediately press and hold button 1 until two
beeps sound.
Repeat these steps using button 2 for a second driver.
To store driver's seat and power steering column positions for
more clearance when exiting the vehicle, repeat steps 1 and 2
Exit button.
using the
Recall Positions
Press button 1, 2 or
button may need to be held down until the seat, mirrors and
power steering column reach the set position.
Note: To change the Auto Memory Recall settings, go to Comfort and
Convenience in the Vehicle Settings menu.
See Seats and Restraints in your Owner Manual.
Exit. Depending on vehicle state, the

ULTRAVIEW SUNROOF♦

Open/Close the Sunshades
Press the Front Sunshade switch on the overhead
console to open or close the front sunshade.
Press the Rear Sunshade switch on the overhead
console or rear doors to open or close the rear sunshade.
Rear Window Sunshade switch on the over-
Press the
head console or rear doors to open or close the rear window
sunshade.
Open/Close the Sunroof
Pull the TILT switch to vent the sunroof. Press the switch
to close the sunroof.
SLIDE switch to express-open the sunroof.
Fully pull the
Fully press the switch to express-close the sunroof.
See Keys, Doors and Windows in your Owner Manual.
14