Memory Seats - Cadillac XT4 Owner's Manual

Memory Seats

If equipped, memory seats allow two
drivers to save and recall their unique
seat positions for driving the vehicle,
and a shared exit position for getting
out of the vehicle. Other feature
positions may also be saved, such as
power mirrors and power steering
wheel, if equipped. Memory positions
are linked to RKE transmitter 1 or 2
for automatic memory recalls.
Before saving, adjust all available
memory feature positions. Turn the
vehicle on and then press and release
SET; a beep will sound. Then
immediately press and hold 1, 2,
or
(Exit) until two beeps sound. To
manually recall these positions, press
and hold 1, 2, or until the saved
position is reached. Follow the
instructions under Saving Memory
Positions.
The vehicle identifies the current
driver's RKE transmitter number
(1 8). See Remote Keyless Entry (RKE)
System Operation 0 8. Only RKE
transmitters 1 and 2 can be used for
automatic memory recalls. A Driver
Information Centre (DIC) welcome
message indicating the transmitter
number may display for the first few
ignition cycles following a transmitter
change. For Seat Entry Memory to
work properly, save the positions to
the memory button (1 or 2) matching
the RKE transmitter number displayed
in the DIC welcome message. Carry
the linked RKE transmitter when
entering the vehicle.
Vehicle Personalisation Settings
To have the Seat Entry Memory
movement begin when the vehicle
is started, select the Settings
menu, then Vehicle, then Seating
SEATS AND RESTRAINTS
Position, and then Seat Entry
Memory. Select On or Off. See
Seat Entry Memory later in this
section.
To begin Seat Exit Memory
movement when the vehicle is
turned off and the driver door is
opened, or when the vehicle is
turned off with the driver door
already opened, select the Settings
menu, then Vehicle, then Seating
Position, and then Seat Exit
Memory. Select On or Off. See
Seat Exit Memory later in this
section.
See Vehicle Personalisation 0 127
for additional setting information.
Identifying Driver Number
To identify the driver number:
1. Move your RKE transmitter away
from the vehicle.
2. Start the vehicle with another
key or RKE transmitter. The DIC
should display the driver number
for the other RKE transmitter.
Turn the vehicle off and remove
the key or RKE transmitter from
the vehicle.
47