Panasonic CF-31 Operating Instructions Manual page 31

Table of Contents

Advertisement

„ Display
<Only for model with GPS>
The cursor cannot be con-
trolled properly.
„ Touch Pad / Touchscreen (only for model with touchscreen)
The cursor does not work.
Cannot input using the touch
pad.
<Only for model with touch
screen>
Cannot input using the
touchscreen.
Cannot point the correct posi-
tion using the included stylus.
<Only for model with touch-
screen>
"Charm" does not always ap-
pear.
„ On-screen Document
The document of PDF for-
mat is not displayed.
l Operate the following steps.
A Starting the Setrup Utility
Restart the computer and press
played.
B Set [GPS] to [Disable] in the sub-menu of [Serial and Parallel Port Settings] in the
[Advanced] menu of the Setup Utility.
F10 and select [Yes] at the confi rmation message, and press Enter .
C Press
The computer will restart.
D Log on to Windows as an administrator.
E
1. Right-click any empty location on the Start screen, and click [All apps] on the app bar.
2. Click [Run] under "Windows System", input [c:\util\drivers\gps\GPS.reg] and click [OK].
Click
(Start) and input "c:\util\drivers\gps\GPS.reg" in [Search programs and
fi les], and press
Enter .
F Click [Yes], click [Yes], and click [OK].
Then restart the computer.
F2 while [Panasonic] boot screen is displayed.
G Press
H Set [GPS] to [Enable] in the sub-menu of [Serial and Parallel Port Settings] in the
[Advanced] menu.
F10 and select [Yes] at the confi rmation message, and press Enter .
I Press
l When using the external mouse, connect it correctly.
l Restart the computer using the keyboard.
l If the computer does not respond to keyboard commands, read "No response"
(è page 32).
l Set [Touch Pad] to [Enabled] in the [Main] menu of the Setup Utility.
l The drivers for some mice may disable the touch pad. Check your mouse's operating
instructions.
l Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.
l Set [Touchscreen] to [Enabled] in the [Advanced] menu of the Setup Utility.
l Perform the touchscreen calibration (è
tion").
l Flick toward the center of the screen from the right edge.
l Use the included pen.
l Install Adobe Reader.
A Log on to Windows as an administrator.
(Start) and input "c:\util\reader\en\Pinstall.bat" in [Search programs and
B Click
fi les] then press Enter .
C Update Adobe Reader to its latest version.
If your computer is connected to the internet, start up Adobe Reader and click [Help]
- [Check for Updates...].
F2 or Del while [Panasonic] boot screen is dis-
Reference Manual "Screen Input Opera-
31

Advertisement

Table of Contents
loading

Table of Contents